BMPBC - COLORING AGENTS, 509
- MSDS: BMPBC
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: COLORING AGENTS, 509
- National Stock Number: 8010-00N025004
Product Identification
Product ID:COLORING AGENTS, 509
MSDS Date:08/23/1988
FSC:8010
NIIN:00N025004
MSDS Number: BMPBC
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 800-543-4530
Info Phone: 513-489-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
2-PENTANE,4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL)
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: 15-30%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITATION, BURNING, TEARING,
REDNESS AND SWELLING. SKIN:IRRITATION. PROLONGED OR REPEATED
CONTACT MAY CAUSE BURNING, DRYING, AND CRACKING. INHAL:IRRITATION
OF NOSE AND THROAT, DROWSINESS AND FAT IGUE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE ESTABLISHED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN.
GET MED ATTN. SKIN:WASH WITH SOAP AND WATER. INHAL:REMOVE PERSON TO
FRESH AIR. INGEST:CALL MD IMMED .
Fire Fighting
Flash Point Method:CC
Flash Point:146F,63C
Lower Limits:1.8%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:WIPE UP AND WASH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINER AWAY
FROM SOURCES OF HEAT OR IGNITION.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL VENTILATION TO MAINTAIN BELOW EXPOSURE LIMITS.
Protective Gloves:PLASTIC OR SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:295F,146C
Vapor Pres:1@20C
Vapor Density:HVR/AIR
Spec Gravity:0.939
Evaporation Rate & Reference:0.18(BUTYL ACETATE=1)
Solubility in Water:LESS THAN 60%
Appearance and Odor:VARIOUS COLORS, MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SOURCES OF IGNITION.
Disposal
Waste Disposal Methods:SMALL QUANTITIES MAY BE DILUTED WITH WATER AND
FLUSHED TO A SEWER. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE
AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.